"E:/Dropbox/ct-AsteroidsClock/main/AsteroidsClock.vhf" line 2204: Unconnected output port 'RXD_IsO' of component 'T4051'. "E:/Dropbox/ct-AsteroidsClock/main/AsteroidsClock.vhf" line 2204: Unconnected output port 'RXD_O' of component 'T4051'. "E:/Dropbox/ct-AsteroidsClock/main/AsteroidsClock.vhf" line 2204: Unconnected output port 'TXD' of component 'T4051'. "E:/Dropbox/ct-AsteroidsClock/main/AsteroidsClock.vhf" line 2228: Unconnected output port 'BEAM_ON' of component 'ASTEROIDS'. "E:/Dropbox/ct-AsteroidsClock/main/AsteroidsClock.vhf" line 2228: Unconnected output port 'BEAM_ENA' of component 'ASTEROIDS'. "E:/Dropbox/ct-AsteroidsClock/main/AsteroidsClock.vhf" line 2239: Unconnected output port 'CEO' of component 'CB8CE_MXILINX_AsteroidsClock'. "E:/Dropbox/ct-AsteroidsClock/main/AsteroidsClock.vhf" line 2239: Unconnected output port 'TC' of component 'CB8CE_MXILINX_AsteroidsClock'. "E:/Dropbox/ct-AsteroidsClock/main/AsteroidsClock.vhf" line 2252: Unconnected output port 'SPIQ2' of component 'CTLAB_SPI_MUSER_AsteroidsClock'. "E:/Dropbox/ct-AsteroidsClock/main/AsteroidsClock.vhf" line 2252: Unconnected output port 'SPIQ3' of component 'CTLAB_SPI_MUSER_AsteroidsClock'. "E:/Dropbox/ct-AsteroidsClock/main/source/T4051.vhd" line 264: Unconnected output port 'RAM_Cycle' of component 'T51'. "E:/Dropbox/ct-AsteroidsClock/main/source/T4051.vhd" line 264: Unconnected output port 'IRAM_Wr' of component 'T51'. "E:/Dropbox/ct-AsteroidsClock/main/source/T4051.vhd" line 264: Unconnected output port 'IRAM_Addr' of component 'T51'. "E:/Dropbox/ct-AsteroidsClock/main/source/T4051.vhd" line 264: Unconnected output port 'IRAM_WData' of component 'T51'. "E:/Dropbox/ct-AsteroidsClock/main/source/T4051.vhd" line 289: Unconnected output port 'P0_Sel' of component 'T51_Glue'. "E:/Dropbox/ct-AsteroidsClock/main/source/T4051.vhd" line 289: Unconnected output port 'P2_Sel' of component 'T51_Glue'. "E:/Dropbox/ct-AsteroidsClock/main/source/ROM4051.vhd" line 268: Instantiating black box module <RAMB16_S4>. "E:/Dropbox/ct-AsteroidsClock/main/source/ROM4051.vhd" line 413: Instantiating black box module <RAMB16_S4>. "E:/Dropbox/ct-AsteroidsClock/main/source/T51.vhd" line 1491: Mux is complete : default of case is discarded "E:/Dropbox/ct-AsteroidsClock/main/source/asteroids.vhd" line 186: Unconnected output port 'Sync' of component 'T65'. "E:/Dropbox/ct-AsteroidsClock/main/source/asteroids.vhd" line 186: Unconnected output port 'EF' of component 'T65'. "E:/Dropbox/ct-AsteroidsClock/main/source/asteroids.vhd" line 186: Unconnected output port 'MF' of component 'T65'. "E:/Dropbox/ct-AsteroidsClock/main/source/asteroids.vhd" line 186: Unconnected output port 'XF' of component 'T65'. "E:/Dropbox/ct-AsteroidsClock/main/source/asteroids.vhd" line 186: Unconnected output port 'ML_n' of component 'T65'. "E:/Dropbox/ct-AsteroidsClock/main/source/asteroids.vhd" line 186: Unconnected output port 'VP_n' of component 'T65'. "E:/Dropbox/ct-AsteroidsClock/main/source/asteroids.vhd" line 186: Unconnected output port 'VDA' of component 'T65'. "E:/Dropbox/ct-AsteroidsClock/main/source/asteroids.vhd" line 186: Unconnected output port 'VPA' of component 'T65'. "E:/Dropbox/ct-AsteroidsClock/main/source/asteroids.vhd" line 529: Unconnected output port 'DOUT_OE_L' of component 'ASTEROIDS_POKEY'. Register <dips_r5_l> in unit <ASTEROIDS> has a constant value of 00100000 during circuit operation. The register is replaced by logic. Register <dips_r8_l> in unit <ASTEROIDS> has a constant value of 11000110 during circuit operation. The register is replaced by logic. Register <control_ip0_l<4>> in unit <ASTEROIDS> has a constant value of 1 during circuit operation. The register is replaced by logic. Register <control_ip0_l<3>> in unit <ASTEROIDS> has a constant value of 1 during circuit operation. The register is replaced by logic. Register <control_ip0_l<2>> in unit <ASTEROIDS> has a constant value of 1 during circuit operation. The register is replaced by logic. Register <test_l> in unit <ASTEROIDS> has a constant value of 1 during circuit operation. The register is replaced by logic. Register <control_ip1_l<2>> in unit <ASTEROIDS> has a constant value of 1 during circuit operation. The register is replaced by logic. Register <control_ip1_l<1>> in unit <ASTEROIDS> has a constant value of 1 during circuit operation. The register is replaced by logic. Register <high_score_dout> in unit <ASTEROIDS> has a constant value of 00000000 during circuit operation. The register is replaced by logic. "E:/Dropbox/ct-AsteroidsClock/main/source/T65.vhd" line 185: Size of operands are different : result is <true>. "E:/Dropbox/ct-AsteroidsClock/main/source/ASTEROIDS_PROG_ROM_0.vhd" line 288: Unconnected output port 'DOP' of component 'RAMB16_S9'. "E:/Dropbox/ct-AsteroidsClock/main/source/ASTEROIDS_PROG_ROM_0.vhd" line 288: Instantiating black box module <RAMB16_S9>. "E:/Dropbox/ct-AsteroidsClock/main/source/ASTEROIDS_PROG_ROM_1.vhd" line 288: Unconnected output port 'DOP' of component 'RAMB16_S9'. "E:/Dropbox/ct-AsteroidsClock/main/source/ASTEROIDS_PROG_ROM_1.vhd" line 288: Instantiating black box module <RAMB16_S9>. "E:/Dropbox/ct-AsteroidsClock/main/source/ASTEROIDS_PROG_ROM_2.vhd" line 288: Unconnected output port 'DOP' of component 'RAMB16_S9'. "E:/Dropbox/ct-AsteroidsClock/main/source/ASTEROIDS_PROG_ROM_2.vhd" line 288: Instantiating black box module <RAMB16_S9>. "E:/Dropbox/ct-AsteroidsClock/main/source/ASTEROIDS_PROG_ROM_3.vhd" line 288: Unconnected output port 'DOP' of component 'RAMB16_S9'. "E:/Dropbox/ct-AsteroidsClock/main/source/ASTEROIDS_PROG_ROM_3.vhd" line 288: Instantiating black box module <RAMB16_S9>. "E:/Dropbox/ct-AsteroidsClock/main/source/asteroids_ram.vhd" line 68: Instantiating black box module <RAMB4_S4>. "E:/Dropbox/ct-AsteroidsClock/main/source/asteroids_ram.vhd" line 79: Instantiating black box module <RAMB4_S4>. "E:/Dropbox/ct-AsteroidsClock/main/source/asteroids_pokey.vhd" line 328: One or more signals are missing in the process sensitivity list. To enable synthesis of FPGA/CPLD hardware, XST will assume that all necessary signals are present in the sensitivity list. Please note that the result of the synthesis may differ from the initial design specification. The missing signals are: <pot_fin> "E:/Dropbox/ct-AsteroidsClock/main/source/ASTEROIDS_VEC_ROM_1.vhd" line 288: Unconnected output port 'DOP' of component 'RAMB16_S9'. "E:/Dropbox/ct-AsteroidsClock/main/source/ASTEROIDS_VEC_ROM_1.vhd" line 288: Instantiating black box module <RAMB16_S9>. "E:/Dropbox/ct-AsteroidsClock/main/source/ASTEROIDS_VEC_ROM_2.vhd" line 288: Unconnected output port 'DOP' of component 'RAMB16_S9'. "E:/Dropbox/ct-AsteroidsClock/main/source/ASTEROIDS_VEC_ROM_2.vhd" line 288: Instantiating black box module <RAMB16_S9>. "E:/Dropbox/ct-AsteroidsClock/main/AsteroidsClock.vhf" line 1744: Unconnected output port 'D1' of component 'D3_8E_MXILINX_AsteroidsClock'. "E:/Dropbox/ct-AsteroidsClock/main/AsteroidsClock.vhf" line 1744: Unconnected output port 'D2' of component 'D3_8E_MXILINX_AsteroidsClock'. "E:/Dropbox/ct-AsteroidsClock/main/AsteroidsClock.vhf" line 1744: Unconnected output port 'D3' of component 'D3_8E_MXILINX_AsteroidsClock'. "E:/Dropbox/ct-AsteroidsClock/main/AsteroidsClock.vhf" line 1744: Unconnected output port 'D4' of component 'D3_8E_MXILINX_AsteroidsClock'. "E:/Dropbox/ct-AsteroidsClock/main/AsteroidsClock.vhf" line 1744: Unconnected output port 'D5' of component 'D3_8E_MXILINX_AsteroidsClock'. "E:/Dropbox/ct-AsteroidsClock/main/AsteroidsClock.vhf" line 1744: Unconnected output port 'D6' of component 'D3_8E_MXILINX_AsteroidsClock'. "E:/Dropbox/ct-AsteroidsClock/main/AsteroidsClock.vhf" line 1744: Unconnected output port 'D7' of component 'D3_8E_MXILINX_AsteroidsClock'. Register <Mode_r> in unit <T65> has a constant value of 00 during circuit operation. The register is replaced by logic. Register <SO_n_o> in unit <T65> has a constant value of 1 during circuit operation. The register is replaced by logic. Register <IRQ_n_o> in unit <T65> has a constant value of 1 during circuit operation. The register is replaced by logic. Input <Int_Acc<6:4>> is never used. This port will be preserved and left unconnected if it belongs to a top-level block or it belongs to a sub-block and the hierarchy of this sub-block is preserved. Input <Rst_n> is never used. This port will be preserved and left unconnected if it belongs to a top-level block or it belongs to a sub-block and the hierarchy of this sub-block is preserved. Signal <Tmp1<15>> is never used or assigned. This unconnected signal will be trimmed during the optimization process. Signal <tone_gen_zero_t<1><7>> is assigned but never used. This unconnected signal will be trimmed during the optimization process. Signal <tone_gen_zero_t<2><7>> is assigned but never used. This unconnected signal will be trimmed during the optimization process. Signal <tone_gen_zero_t<3><7>> is assigned but never used. This unconnected signal will be trimmed during the optimization process. Signal <tone_gen_zero_t<4><7>> is assigned but never used. This unconnected signal will be trimmed during the optimization process. Signal <stimer> is assigned but never used. This unconnected signal will be trimmed during the optimization process. Signal <skstat> is used but never assigned. This sourceless signal will be automatically connected to value 00000000. Signal <skres> is assigned but never used. This unconnected signal will be trimmed during the optimization process. Signal <skctls<7:3>> is assigned but never used. This unconnected signal will be trimmed during the optimization process. Signal <serout> is assigned but never used. This unconnected signal will be trimmed during the optimization process. Signal <serin> is used but never assigned. This sourceless signal will be automatically connected to value 00000000. Signal <poly_sel_hp_reg<4:3>> is never used or assigned. This unconnected signal will be trimmed during the optimization process. Signal <kbcode> is used but never assigned. This sourceless signal will be automatically connected to value 00000000. Signal <irqst> is used but never assigned. This sourceless signal will be automatically connected to value 00000000. Signal <irqen> is assigned but never used. This unconnected signal will be trimmed during the optimization process. Input <P<5:2>> is never used. This port will be preserved and left unconnected if it belongs to a top-level block or it belongs to a sub-block and the hierarchy of this sub-block is preserved. Input <Mode> is never used. This port will be preserved and left unconnected if it belongs to a top-level block or it belongs to a sub-block and the hierarchy of this sub-block is preserved. Input <Abort_n> is never used. This port will be preserved and left unconnected if it belongs to a top-level block or it belongs to a sub-block and the hierarchy of this sub-block is preserved. Signal <Y<15:8>> is never used or assigned. This unconnected signal will be trimmed during the optimization process. Signal <X<15:8>> is never used or assigned. This unconnected signal will be trimmed during the optimization process. Signal <P_Out<5>> is assigned but never used. This unconnected signal will be trimmed during the optimization process. Signal <D> is assigned but never used. This unconnected signal will be trimmed during the optimization process. Signal <ABC<15:8>> is never used or assigned. This unconnected signal will be trimmed during the optimization process. Signal <ramrw_r> is assigned but never used. This unconnected signal will be trimmed during the optimization process. Signal <Do_ACC_Wr> is assigned but never used. This unconnected signal will be trimmed during the optimization process. Signal <DPS_r> is never used or assigned. This unconnected signal will be trimmed during the optimization process. Signal <DPL1> is never used or assigned. This unconnected signal will be trimmed during the optimization process. Signal <DPH1> is never used or assigned. This unconnected signal will be trimmed during the optimization process. Input <C_ADDR<15:13>> is never used. This port will be preserved and left unconnected if it belongs to a top-level block or it belongs to a sub-block and the hierarchy of this sub-block is preserved. Signal <ratemuly_reg_and<9>> is assigned but never used. This unconnected signal will be trimmed during the optimization process. Signal <ratemuly_clock_g> is never used or assigned. This unconnected signal will be trimmed during the optimization process. Signal <ratemulx_reg_and<9>> is assigned but never used. This unconnected signal will be trimmed during the optimization process. Signal <ratemulx_clock_g> is never used or assigned. This unconnected signal will be trimmed during the optimization process. Signal <offset> is never used or assigned. This unconnected signal will be trimmed during the optimization process. Signal <XLXN_130> is used but never assigned. This sourceless signal will be automatically connected to value 0. Signal <zeros> is assigned but never used. This unconnected signal will be trimmed during the optimization process. Signal <int_xram_sel_n> is assigned but never used. This unconnected signal will be trimmed during the optimization process. Signal <ext_ram_en> is used but never assigned. This sourceless signal will be automatically connected to value 0. Signal <XRAM_WE_O> is assigned but never used. This unconnected signal will be trimmed during the optimization process. Signal <XRAM_STB_O> is assigned but never used. This unconnected signal will be trimmed during the optimization process. Signal <XRAM_DAT_O> is assigned but never used. This unconnected signal will be trimmed during the optimization process. Signal <XRAM_DAT_I> is used but never assigned. This sourceless signal will be automatically connected to value 00000000. Signal <XRAM_CYC_O> is assigned but never used. This unconnected signal will be trimmed during the optimization process. Signal <XRAM_ADR_O> is assigned but never used. This unconnected signal will be trimmed during the optimization process. Signal <XRAM_ACK_I> is used but never assigned. This sourceless signal will be automatically connected to value 0. Signal <ROM_Addr<15:12>> is assigned but never used. This unconnected signal will be trimmed during the optimization process. Signal <RAM_WE_n> is assigned but never used. This unconnected signal will be trimmed during the optimization process. Signal <RAM_DO> is used but never assigned. This sourceless signal will be automatically connected to value 00000000. Signal <P2_Wr> is assigned but never used. This unconnected signal will be trimmed during the optimization process. Signal <P2_Sel> is never used or assigned. This unconnected signal will be trimmed during the optimization process. Signal <P0_Wr> is assigned but never used. This unconnected signal will be trimmed during the optimization process. Signal <P0_Sel> is never used or assigned. This unconnected signal will be trimmed during the optimization process. Signal <IO_RData_en<0>> is assigned but never used. This unconnected signal will be trimmed during the optimization process. Signal <IO_RData_en<1>> is used but never assigned. This sourceless signal will be automatically connected to value 0. Signal <IO_RData_en<3>> is used but never assigned. This sourceless signal will be automatically connected to value 0. Signal <IO_RData_arr<1>> is used but never assigned. This sourceless signal will be automatically connected to value 00000000. Signal <IO_RData_arr<3>> is used but never assigned. This sourceless signal will be automatically connected to value 00000000. Signal <start2_led_l> is assigned but never used. This unconnected signal will be trimmed during the optimization process. Signal <start1_led_l> is assigned but never used. This unconnected signal will be trimmed during the optimization process. Signal <shpsnd> is never used or assigned. This unconnected signal will be trimmed during the optimization process. Signal <noiserst_l> is assigned but never used. This unconnected signal will be trimmed during the optimization process. Signal <noise_shift<15>> is assigned but never used. This unconnected signal will be trimmed during the optimization process. Signal <high_score_dout> is assigned but never used. This unconnected signal will be trimmed during the optimization process. Signal <high_score_din> is assigned but never used. This unconnected signal will be trimmed during the optimization process. Signal <high_score_addr> is assigned but never used. This unconnected signal will be trimmed during the optimization process. Signal <ena_3M> is assigned but never used. This unconnected signal will be trimmed during the optimization process. Signal <earead> is assigned but never used. This unconnected signal will be trimmed during the optimization process. Signal <eacontrol_l> is assigned but never used. This unconnected signal will be trimmed during the optimization process. Signal <dips_r5_l> is assigned but never used. This unconnected signal will be trimmed during the optimization process. Signal <c_addr<23:16>> is assigned but never used. This unconnected signal will be trimmed during the optimization process. Signal <XLXI_210_SLI_openSignal> is used but never assigned. This sourceless signal will be automatically connected to value 0. Signal <XLXI_208_SLI_openSignal> is used but never assigned. This sourceless signal will be automatically connected to value 0. Signal <XLXI_206_SLI_openSignal> is used but never assigned. This sourceless signal will be automatically connected to value 0. Signal <XLXI_205_SLI_openSignal> is used but never assigned. This sourceless signal will be automatically connected to value 0. Signal <Q3L<14:0>> is assigned but never used. This unconnected signal will be trimmed during the optimization process. Signal <Q3H<14:0>> is assigned but never used. This unconnected signal will be trimmed during the optimization process. Signal <Q2L<14:0>> is assigned but never used. This unconnected signal will be trimmed during the optimization process. Signal <Q2H<14:0>> is assigned but never used. This unconnected signal will be trimmed during the optimization process. Signal <Q1L<14:0>> is assigned but never used. This unconnected signal will be trimmed during the optimization process. Signal <Q1H<14:0>> is assigned but never used. This unconnected signal will be trimmed during the optimization process. Signal <Q0L<14:0>> is assigned but never used. This unconnected signal will be trimmed during the optimization process. Signal <Q0H<14:0>> is assigned but never used. This unconnected signal will be trimmed during the optimization process. Signal <REGSEL<7>> is assigned but never used. This unconnected signal will be trimmed during the optimization process. Signal <REGSEL<3:2>> is assigned but never used. This unconnected signal will be trimmed during the optimization process. Signal <XLXI_183_SPID2_openSignal> is used but never assigned. This sourceless signal will be automatically connected to value 00000000000000000000000000000000. Signal <XLXI_183_SPID1_openSignal> is used but never assigned. This sourceless signal will be automatically connected to value 00000000000000000000000000000000. Signal <XLXI_183_SPID0_openSignal> is used but never assigned. This sourceless signal will be automatically connected to value 00000000000000000000000000000000. Signal <TestENA> is assigned but never used. This unconnected signal will be trimmed during the optimization process. Signal <P3_O<6>> is assigned but never used. This unconnected signal will be trimmed during the optimization process. Signal <P3_O<3:0>> is assigned but never used. This unconnected signal will be trimmed during the optimization process. Signal <MPU4051_T2_openSignal> is used but never assigned. This sourceless signal will be automatically connected to value 0. Signal <MPU4051_T2EX_openSignal> is used but never assigned. This sourceless signal will be automatically connected to value 0. Signal <MPU4051_T1_openSignal> is used but never assigned. This sourceless signal will be automatically connected to value 0. Signal <MPU4051_RXD_openSignal> is used but never assigned. This sourceless signal will be automatically connected to value 0. Signal <MPU4051_P1_in_openSignal> is used but never assigned. This sourceless signal will be automatically connected to value 00000000. Signal <MPU4051_INT1_openSignal> is used but never assigned. This sourceless signal will be automatically connected to value 0. Signal <CONFIG<31:9>> is assigned but never used. This unconnected signal will be trimmed during the optimization process. Signal <CONFIG<7:5>> is assigned but never used. This unconnected signal will be trimmed during the optimization process. Signal <CONFIG<3:1>> is assigned but never used. This unconnected signal will be trimmed during the optimization process. Signal <CLOCK_DACXY<1:0>> is used but never assigned. This sourceless signal will be automatically connected to value 00. Signal <CLKs<7:5>> is assigned but never used. This unconnected signal will be trimmed during the optimization process. Signal <CLKs<1>> is assigned but never used. This unconnected signal will be trimmed during the optimization process. Signal <BUTTON<31:29>> is assigned but never used. This unconnected signal will be trimmed during the optimization process. Signal <BUTTON<27:25>> is assigned but never used. This unconnected signal will be trimmed during the optimization process. Signal <BUTTON<23:21>> is assigned but never used. This unconnected signal will be trimmed during the optimization process. Signal <BUTTON<19:17>> is assigned but never used. This unconnected signal will be trimmed during the optimization process. Signal <BUTTON<15:13>> is assigned but never used. This unconnected signal will be trimmed during the optimization process. Signal <BUTTON<11:9>> is assigned but never used. This unconnected signal will be trimmed during the optimization process. Signal <BUTTON<7:5>> is assigned but never used. This unconnected signal will be trimmed during the optimization process. Signal <BUTTON<3:1>> is assigned but never used. This unconnected signal will be trimmed during the optimization process. Signal <AST_AUDIO<3:0>> is assigned but never used. This unconnected signal will be trimmed during the optimization process. Signal <ADJUST<7:4>> is used but never assigned. This sourceless signal will be automatically connected to value 0000. Signal <ADJUST<2>> is used but never assigned. This sourceless signal will be automatically connected to value 0. HDL ADVISOR - Resource sharing has identified that some arithmetic operations in this design can share the same physical resources for reduced device utilization. For improved clock frequency you may try to disable resource sharing. The FF/Latch <MOV_Op_0> in Unit <alu> is equivalent to the following FF/Latch, which will be removed : <Do_B_Op_0> The FF/Latch <MOV_Op_1> in Unit <alu> is equivalent to the following FF/Latch, which will be removed : <Do_B_Op_1> The FF/Latch <DBR_0> in Unit <cpu> is equivalent to the following 7 FFs/Latches, which will be removed : <DBR_1> <DBR_2> <DBR_3> <DBR_4> <DBR_5> <DBR_6> <DBR_7> The FF/Latch <AUDIO_OUT_0> in Unit <pokey> is equivalent to the following 2 FFs/Latches, which will be removed : <AUDIO_OUT_1> <AUDIO_OUT_2> The FF/Latch <pin_reg_0> in Unit <pokey> is equivalent to the following 3 FFs/Latches, which will be removed : <pin_reg_3> <pin_reg_4> <pin_reg_5> The FF/Latch <pin_reg_1> in Unit <pokey> is equivalent to the following 3 FFs/Latches, which will be removed : <pin_reg_2> <pin_reg_6> <pin_reg_7> The FF/Latch <shpsnd_filter_t1_0> in Unit <XLXI_11> is equivalent to the following 3 FFs/Latches, which will be removed : <shpsnd_filter_t1_1> <shpsnd_filter_t1_2> <shpsnd_filter_t1_3> The FF/Latch <noise_shift_0> in Unit <XLXI_11> is equivalent to the following FF/Latch, which will be removed : <noise> The FF/Latch <shpsnd_filter_t2_0> in Unit <XLXI_11> is equivalent to the following 3 FFs/Latches, which will be removed : <shpsnd_filter_t2_1> <shpsnd_filter_t2_2> <shpsnd_filter_t2_3> The value init of the FF/Latch P_5 hinder the constant cleaning in the block cpu. You should achieve better results by setting this init to 1. FF/Latch <pot_val_2_2> (without init value) has a constant value of 0 in block <pokey>. This FF/Latch will be trimmed during the optimization process. FF/Latch <pot_val_2_3> (without init value) has a constant value of 0 in block <pokey>. This FF/Latch will be trimmed during the optimization process. FF/Latch <pot_val_2_4> (without init value) has a constant value of 0 in block <pokey>. This FF/Latch will be trimmed during the optimization process. FF/Latch <pot_val_2_5> (without init value) has a constant value of 0 in block <pokey>. This FF/Latch will be trimmed during the optimization process. FF/Latch <pot_val_2_6> (without init value) has a constant value of 0 in block <pokey>. This FF/Latch will be trimmed during the optimization process. FF/Latch <pot_val_2_7> (without init value) has a constant value of 0 in block <pokey>. This FF/Latch will be trimmed during the optimization process. FF/Latch <pot_val_6_0> (without init value) has a constant value of 0 in block <pokey>. This FF/Latch will be trimmed during the optimization process. FF/Latch <pot_val_6_1> (without init value) has a constant value of 0 in block <pokey>. This FF/Latch will be trimmed during the optimization process. FF/Latch <pot_val_6_2> (without init value) has a constant value of 0 in block <pokey>. This FF/Latch will be trimmed during the optimization process. FF/Latch <pot_val_6_3> (without init value) has a constant value of 0 in block <pokey>. This FF/Latch will be trimmed during the optimization process. FF/Latch <pot_val_6_4> (without init value) has a constant value of 0 in block <pokey>. This FF/Latch will be trimmed during the optimization process. FF/Latch <pot_val_6_5> (without init value) has a constant value of 0 in block <pokey>. This FF/Latch will be trimmed during the optimization process. FF/Latch <pot_val_6_6> (without init value) has a constant value of 0 in block <pokey>. This FF/Latch will be trimmed during the optimization process. FF/Latch <pot_val_6_7> (without init value) has a constant value of 0 in block <pokey>. This FF/Latch will be trimmed during the optimization process. FF/Latch <pot_val_7_0> (without init value) has a constant value of 0 in block <pokey>. This FF/Latch will be trimmed during the optimization process. FF/Latch <pot_val_7_1> (without init value) has a constant value of 0 in block <pokey>. This FF/Latch will be trimmed during the optimization process. FF/Latch <pot_val_7_2> (without init value) has a constant value of 0 in block <pokey>. This FF/Latch will be trimmed during the optimization process. FF/Latch <pot_val_7_3> (without init value) has a constant value of 0 in block <pokey>. This FF/Latch will be trimmed during the optimization process. FF/Latch <pot_val_7_4> (without init value) has a constant value of 0 in block <pokey>. This FF/Latch will be trimmed during the optimization process. FF/Latch <pot_val_7_5> (without init value) has a constant value of 0 in block <pokey>. This FF/Latch will be trimmed during the optimization process. FF/Latch <pot_val_7_6> (without init value) has a constant value of 0 in block <pokey>. This FF/Latch will be trimmed during the optimization process. FF/Latch <pot_val_7_7> (without init value) has a constant value of 0 in block <pokey>. This FF/Latch will be trimmed during the optimization process. FF/Latch <Int_Trig_r_6> (without init value) has a constant value of 0 in block <core51>. This FF/Latch will be trimmed during the optimization process. FF/Latch <I1_r_0> (without init value) has a constant value of 0 in block <tc01>. This FF/Latch will be trimmed during the optimization process. FF/Latch <T1_r_0> (without init value) has a constant value of 0 in block <tc01>. This FF/Latch will be trimmed during the optimization process. FF/Latch <E_r_0> (without init value) has a constant value of 0 in block <tc2>. This FF/Latch will be trimmed during the optimization process. FF/Latch <Capture> (without init value) has a constant value of 0 in block <tc2>. This FF/Latch will be trimmed during the optimization process. FF/Latch <T_r_0> (without init value) has a constant value of 0 in block <tc2>. This FF/Latch will be trimmed during the optimization process. FF/Latch <IRQCycle> (without init value) has a constant value of 0 in block <cpu>. This FF/Latch will be trimmed during the optimization process. FF/Latch <pin_reg_0> (without init value) has a constant value of 0 in block <pokey>. This FF/Latch will be trimmed during the optimization process. FF/Latch <pin_reg_1> (without init value) has a constant value of 1 in block <pokey>. This FF/Latch will be trimmed during the optimization process. FF/Latch <pot_val_1_0> (without init value) has a constant value of 0 in block <pokey>. This FF/Latch will be trimmed during the optimization process. FF/Latch <pot_val_1_1> (without init value) has a constant value of 0 in block <pokey>. This FF/Latch will be trimmed during the optimization process. FF/Latch <pot_val_1_2> (without init value) has a constant value of 0 in block <pokey>. This FF/Latch will be trimmed during the optimization process. FF/Latch <pot_val_1_3> (without init value) has a constant value of 0 in block <pokey>. This FF/Latch will be trimmed during the optimization process. FF/Latch <pot_val_1_4> (without init value) has a constant value of 0 in block <pokey>. This FF/Latch will be trimmed during the optimization process. FF/Latch <pot_val_1_5> (without init value) has a constant value of 0 in block <pokey>. This FF/Latch will be trimmed during the optimization process. FF/Latch <pot_val_1_6> (without init value) has a constant value of 0 in block <pokey>. This FF/Latch will be trimmed during the optimization process. FF/Latch <pot_val_1_7> (without init value) has a constant value of 0 in block <pokey>. This FF/Latch will be trimmed during the optimization process. FF/Latch <pot_val_2_0> (without init value) has a constant value of 0 in block <pokey>. This FF/Latch will be trimmed during the optimization process. FF/Latch <pot_val_2_1> (without init value) has a constant value of 0 in block <pokey>. This FF/Latch will be trimmed during the optimization process. Due to other FF/Latch trimming, FF/Latch <T_r_1> (without init value) has a constant value of 0 in block <tc2>. This FF/Latch will be trimmed during the optimization process. Due to other FF/Latch trimming, FF/Latch <E_r_1> (without init value) has a constant value of 0 in block <tc2>. This FF/Latch will be trimmed during the optimization process. Due to other FF/Latch trimming, FF/Latch <T1_r_1> (without init value) has a constant value of 0 in block <tc01>. This FF/Latch will be trimmed during the optimization process. Due to other FF/Latch trimming, FF/Latch <I1_r_1> (without init value) has a constant value of 0 in block <tc01>. This FF/Latch will be trimmed during the optimization process. Node <Int_Acc_4> of sequential type is unconnected in block <core51>. Node <Int_Acc_5> of sequential type is unconnected in block <core51>. Node <Int_Acc_6> of sequential type is unconnected in block <core51>. Node <skctls_3> of sequential type is unconnected in block <pokey>. Node <skctls_4> of sequential type is unconnected in block <pokey>. Node <skctls_5> of sequential type is unconnected in block <pokey>. Node <skctls_6> of sequential type is unconnected in block <pokey>. Node <skctls_7> of sequential type is unconnected in block <pokey>. Node <tone_gen_zero_t_1_6> of sequential type is unconnected in block <pokey>. Node <tone_gen_zero_t_1_7> of sequential type is unconnected in block <pokey>. Node <tone_gen_zero_t_2_6> of sequential type is unconnected in block <pokey>. Node <tone_gen_zero_t_2_7> of sequential type is unconnected in block <pokey>. Node <tone_gen_zero_t_3_6> of sequential type is unconnected in block <pokey>. Node <tone_gen_zero_t_3_7> of sequential type is unconnected in block <pokey>. Node <tone_gen_zero_t_4_6> of sequential type is unconnected in block <pokey>. Node <tone_gen_zero_t_4_7> of sequential type is unconnected in block <pokey>. Node <noise_shift_15> of sequential type is unconnected in block <XLXI_11>. Node <AUDIO_OUT_0> of sequential type is unconnected in block <XLXI_11>. Node <AUDIO_OUT_1> of sequential type is unconnected in block <XLXI_11>. Node <AUDIO_OUT_2> of sequential type is unconnected in block <XLXI_11>. Node <AUDIO_OUT_3> of sequential type is unconnected in block <XLXI_11>. In order to maximize performance and save block RAM resources, the small ROM <Mrom_RMux_PCH_mux0003> will be implemented on LUT. If you want to force its implementation on block, use option/constraint rom_style. HDL ADVISOR - The RAM <Mram_IRAMA> will be implemented on LUTs either because you have described an asynchronous read or because of currently unsupported block RAM features. If you have described an asynchronous read, making it synchronous would allow you to take advantage of available block RAM resources, for optimized device usage and improved timings. Please refer to your documentation for coding guidelines. HDL ADVISOR - The RAM <Mram_IRAMB> will be implemented on LUTs either because you have described an asynchronous read or because of currently unsupported block RAM features. If you have described an asynchronous read, making it synchronous would allow you to take advantage of available block RAM resources, for optimized device usage and improved timings. Please refer to your documentation for coding guidelines. Node <skctls_3> of sequential type is unconnected in block <ASTEROIDS_POKEY>. Node <skctls_4> of sequential type is unconnected in block <ASTEROIDS_POKEY>. Node <skctls_5> of sequential type is unconnected in block <ASTEROIDS_POKEY>. Node <skctls_6> of sequential type is unconnected in block <ASTEROIDS_POKEY>. Node <skctls_7> of sequential type is unconnected in block <ASTEROIDS_POKEY>. Node <tone_gen_zero_t_1_6> of sequential type is unconnected in block <ASTEROIDS_POKEY>. Node <tone_gen_zero_t_1_7> of sequential type is unconnected in block <ASTEROIDS_POKEY>. Node <tone_gen_zero_t_2_6> of sequential type is unconnected in block <ASTEROIDS_POKEY>. Node <tone_gen_zero_t_2_7> of sequential type is unconnected in block <ASTEROIDS_POKEY>. Node <tone_gen_zero_t_3_6> of sequential type is unconnected in block <ASTEROIDS_POKEY>. Node <tone_gen_zero_t_3_7> of sequential type is unconnected in block <ASTEROIDS_POKEY>. Node <tone_gen_zero_t_4_6> of sequential type is unconnected in block <ASTEROIDS_POKEY>. Node <tone_gen_zero_t_4_7> of sequential type is unconnected in block <ASTEROIDS_POKEY>. Node <noise_shift_15> of sequential type is unconnected in block <ASTEROIDS>. FF/Latch <pot_val_2_4> (without init value) has a constant value of 0 in block <ASTEROIDS_POKEY>. This FF/Latch will be trimmed during the optimization process. Due to other FF/Latch trimming, FF/Latch <pot_val_2_5> (without init value) has a constant value of 0 in block <ASTEROIDS_POKEY>. This FF/Latch will be trimmed during the optimization process. Due to other FF/Latch trimming, FF/Latch <pot_val_2_6> (without init value) has a constant value of 0 in block <ASTEROIDS_POKEY>. This FF/Latch will be trimmed during the optimization process. Due to other FF/Latch trimming, FF/Latch <pot_val_2_7> (without init value) has a constant value of 0 in block <ASTEROIDS_POKEY>. This FF/Latch will be trimmed during the optimization process. Due to other FF/Latch trimming, FF/Latch <pot_val_6_0> (without init value) has a constant value of 0 in block <ASTEROIDS_POKEY>. This FF/Latch will be trimmed during the optimization process. Due to other FF/Latch trimming, FF/Latch <pot_val_6_1> (without init value) has a constant value of 0 in block <ASTEROIDS_POKEY>. This FF/Latch will be trimmed during the optimization process. Due to other FF/Latch trimming, FF/Latch <pot_val_6_2> (without init value) has a constant value of 0 in block <ASTEROIDS_POKEY>. This FF/Latch will be trimmed during the optimization process. Due to other FF/Latch trimming, FF/Latch <pot_val_6_3> (without init value) has a constant value of 0 in block <ASTEROIDS_POKEY>. This FF/Latch will be trimmed during the optimization process. Due to other FF/Latch trimming, FF/Latch <pot_val_6_4> (without init value) has a constant value of 0 in block <ASTEROIDS_POKEY>. This FF/Latch will be trimmed during the optimization process. Due to other FF/Latch trimming, FF/Latch <pot_val_6_5> (without init value) has a constant value of 0 in block <ASTEROIDS_POKEY>. This FF/Latch will be trimmed during the optimization process. Due to other FF/Latch trimming, FF/Latch <pot_val_6_6> (without init value) has a constant value of 0 in block <ASTEROIDS_POKEY>. This FF/Latch will be trimmed during the optimization process. Due to other FF/Latch trimming, FF/Latch <pot_val_6_7> (without init value) has a constant value of 0 in block <ASTEROIDS_POKEY>. This FF/Latch will be trimmed during the optimization process. Due to other FF/Latch trimming, FF/Latch <pot_val_7_0> (without init value) has a constant value of 0 in block <ASTEROIDS_POKEY>. This FF/Latch will be trimmed during the optimization process. Due to other FF/Latch trimming, FF/Latch <pot_val_7_1> (without init value) has a constant value of 0 in block <ASTEROIDS_POKEY>. This FF/Latch will be trimmed during the optimization process. Due to other FF/Latch trimming, FF/Latch <pot_val_7_2> (without init value) has a constant value of 0 in block <ASTEROIDS_POKEY>. This FF/Latch will be trimmed during the optimization process. Due to other FF/Latch trimming, FF/Latch <pot_val_7_3> (without init value) has a constant value of 0 in block <ASTEROIDS_POKEY>. This FF/Latch will be trimmed during the optimization process. Due to other FF/Latch trimming, FF/Latch <pot_val_7_4> (without init value) has a constant value of 0 in block <ASTEROIDS_POKEY>. This FF/Latch will be trimmed during the optimization process. Due to other FF/Latch trimming, FF/Latch <pot_val_7_5> (without init value) has a constant value of 0 in block <ASTEROIDS_POKEY>. This FF/Latch will be trimmed during the optimization process. Due to other FF/Latch trimming, FF/Latch <pot_val_7_6> (without init value) has a constant value of 0 in block <ASTEROIDS_POKEY>. This FF/Latch will be trimmed during the optimization process. Due to other FF/Latch trimming, FF/Latch <pot_val_7_7> (without init value) has a constant value of 0 in block <ASTEROIDS_POKEY>. This FF/Latch will be trimmed during the optimization process. Due to other FF/Latch trimming, FF/Latch <pin_reg_0> (without init value) has a constant value of 0 in block <ASTEROIDS_POKEY>. This FF/Latch will be trimmed during the optimization process. Due to other FF/Latch trimming, FF/Latch <pin_reg_1> (without init value) has a constant value of 1 in block <ASTEROIDS_POKEY>. This FF/Latch will be trimmed during the optimization process. Due to other FF/Latch trimming, FF/Latch <pin_reg_2> (without init value) has a constant value of 1 in block <ASTEROIDS_POKEY>. This FF/Latch will be trimmed during the optimization process. Due to other FF/Latch trimming, FF/Latch <pin_reg_3> (without init value) has a constant value of 0 in block <ASTEROIDS_POKEY>. This FF/Latch will be trimmed during the optimization process. Due to other FF/Latch trimming, FF/Latch <pin_reg_4> (without init value) has a constant value of 0 in block <ASTEROIDS_POKEY>. This FF/Latch will be trimmed during the optimization process. Due to other FF/Latch trimming, FF/Latch <pin_reg_5> (without init value) has a constant value of 0 in block <ASTEROIDS_POKEY>. This FF/Latch will be trimmed during the optimization process. Due to other FF/Latch trimming, FF/Latch <pin_reg_6> (without init value) has a constant value of 1 in block <ASTEROIDS_POKEY>. This FF/Latch will be trimmed during the optimization process. Due to other FF/Latch trimming, FF/Latch <pin_reg_7> (without init value) has a constant value of 1 in block <ASTEROIDS_POKEY>. This FF/Latch will be trimmed during the optimization process. Due to other FF/Latch trimming, FF/Latch <pot_val_1_0> (without init value) has a constant value of 0 in block <ASTEROIDS_POKEY>. This FF/Latch will be trimmed during the optimization process. Due to other FF/Latch trimming, FF/Latch <pot_val_1_1> (without init value) has a constant value of 0 in block <ASTEROIDS_POKEY>. This FF/Latch will be trimmed during the optimization process. Due to other FF/Latch trimming, FF/Latch <pot_val_1_2> (without init value) has a constant value of 0 in block <ASTEROIDS_POKEY>. This FF/Latch will be trimmed during the optimization process. Due to other FF/Latch trimming, FF/Latch <pot_val_1_3> (without init value) has a constant value of 0 in block <ASTEROIDS_POKEY>. This FF/Latch will be trimmed during the optimization process. Due to other FF/Latch trimming, FF/Latch <pot_val_1_4> (without init value) has a constant value of 0 in block <ASTEROIDS_POKEY>. This FF/Latch will be trimmed during the optimization process. Due to other FF/Latch trimming, FF/Latch <pot_val_1_5> (without init value) has a constant value of 0 in block <ASTEROIDS_POKEY>. This FF/Latch will be trimmed during the optimization process. Due to other FF/Latch trimming, FF/Latch <pot_val_1_6> (without init value) has a constant value of 0 in block <ASTEROIDS_POKEY>. This FF/Latch will be trimmed during the optimization process. Due to other FF/Latch trimming, FF/Latch <pot_val_1_7> (without init value) has a constant value of 0 in block <ASTEROIDS_POKEY>. This FF/Latch will be trimmed during the optimization process. Due to other FF/Latch trimming, FF/Latch <pot_val_2_0> (without init value) has a constant value of 0 in block <ASTEROIDS_POKEY>. This FF/Latch will be trimmed during the optimization process. Due to other FF/Latch trimming, FF/Latch <pot_val_2_1> (without init value) has a constant value of 0 in block <ASTEROIDS_POKEY>. This FF/Latch will be trimmed during the optimization process. Due to other FF/Latch trimming, FF/Latch <pot_val_2_2> (without init value) has a constant value of 0 in block <ASTEROIDS_POKEY>. This FF/Latch will be trimmed during the optimization process. Due to other FF/Latch trimming, FF/Latch <pot_val_2_3> (without init value) has a constant value of 0 in block <ASTEROIDS_POKEY>. This FF/Latch will be trimmed during the optimization process. The value init of the FF/Latch P_5 hinder the constant cleaning in the block T65. You should achieve better results by setting this init to 1. FF/Latch <IRQCycle> (without init value) has a constant value of 0 in block <T65>. This FF/Latch will be trimmed during the optimization process. The FF/Latch <AUDIO_OUT_0> in Unit <ASTEROIDS_POKEY> is equivalent to the following 2 FFs/Latches, which will be removed : <AUDIO_OUT_1> <AUDIO_OUT_2> The FF/Latch <pot_val_0_0> in Unit <ASTEROIDS_POKEY> is equivalent to the following 3 FFs/Latches, which will be removed : <pot_val_3_0> <pot_val_4_0> <pot_val_5_0> The FF/Latch <pot_val_0_1> in Unit <ASTEROIDS_POKEY> is equivalent to the following 3 FFs/Latches, which will be removed : <pot_val_3_1> <pot_val_4_1> <pot_val_5_1> The FF/Latch <pot_val_0_2> in Unit <ASTEROIDS_POKEY> is equivalent to the following 3 FFs/Latches, which will be removed : <pot_val_3_2> <pot_val_4_2> <pot_val_5_2> The FF/Latch <pot_val_0_3> in Unit <ASTEROIDS_POKEY> is equivalent to the following 3 FFs/Latches, which will be removed : <pot_val_3_3> <pot_val_4_3> <pot_val_5_3> The FF/Latch <pot_val_0_4> in Unit <ASTEROIDS_POKEY> is equivalent to the following 3 FFs/Latches, which will be removed : <pot_val_3_4> <pot_val_4_4> <pot_val_5_4> The FF/Latch <pot_val_0_5> in Unit <ASTEROIDS_POKEY> is equivalent to the following 3 FFs/Latches, which will be removed : <pot_val_3_5> <pot_val_4_5> <pot_val_5_5> The FF/Latch <pot_val_0_6> in Unit <ASTEROIDS_POKEY> is equivalent to the following 3 FFs/Latches, which will be removed : <pot_val_3_6> <pot_val_4_6> <pot_val_5_6> The FF/Latch <pot_val_0_7> in Unit <ASTEROIDS_POKEY> is equivalent to the following 3 FFs/Latches, which will be removed : <pot_val_3_7> <pot_val_4_7> <pot_val_5_7> The FF/Latch <MOV_Op_0> in Unit <T51_ALU> is equivalent to the following FF/Latch, which will be removed : <Do_B_Op_0> The FF/Latch <MOV_Op_1> in Unit <T51_ALU> is equivalent to the following FF/Latch, which will be removed : <Do_B_Op_1> The FF/Latch <DBR_0> in Unit <T65> is equivalent to the following 7 FFs/Latches, which will be removed : <DBR_1> <DBR_2> <DBR_3> <DBR_4> <DBR_5> <DBR_6> <DBR_7> The FF/Latch <shpsnd_filter_t1_0> in Unit <ASTEROIDS> is equivalent to the following 3 FFs/Latches, which will be removed : <shpsnd_filter_t1_1> <shpsnd_filter_t1_2> <shpsnd_filter_t1_3> The FF/Latch <noise_shift_0> in Unit <ASTEROIDS> is equivalent to the following FF/Latch, which will be removed : <noise> The FF/Latch <shpsnd_filter_t2_0> in Unit <ASTEROIDS> is equivalent to the following 3 FFs/Latches, which will be removed : <shpsnd_filter_t2_1> <shpsnd_filter_t2_2> <shpsnd_filter_t2_3> The FF/Latch <shpsnd_filter_t3_0> in Unit <ASTEROIDS> is equivalent to the following 3 FFs/Latches, which will be removed : <shpsnd_filter_t3_1> <shpsnd_filter_t3_2> <shpsnd_filter_t3_3> Node <S_8> of sequential type is unconnected in block <T65>. Node <S_9> of sequential type is unconnected in block <T65>. Node <S_10> of sequential type is unconnected in block <T65>. Node <S_11> of sequential type is unconnected in block <T65>. Node <S_12> of sequential type is unconnected in block <T65>. Node <S_13> of sequential type is unconnected in block <T65>. Node <S_14> of sequential type is unconnected in block <T65>. Node <S_15> of sequential type is unconnected in block <T65>. Node <reg_addr_2> of sequential type is unconnected in block <ASTEROIDS_VG>. Node <reg_addr_3> of sequential type is unconnected in block <ASTEROIDS_VG>. Instance u_vector_rom_1/rom0.inst in unit u_vector_rom_1/rom0.inst of type RAMB16_S9 has been replaced by RAMB16 Instance u_vector_rom_2/rom0.inst in unit u_vector_rom_2/rom0.inst of type RAMB16_S9 has been replaced by RAMB16 Instance rom0/rom0.inst in unit rom0/rom0.inst of type RAMB16_S9 has been replaced by RAMB16 Instance rom1/rom0.inst in unit rom1/rom0.inst of type RAMB16_S9 has been replaced by RAMB16 Instance rom2/rom0.inst in unit rom2/rom0.inst of type RAMB16_S9 has been replaced by RAMB16 Instance rom3/rom0.inst in unit rom3/rom0.inst of type RAMB16_S9 has been replaced by RAMB16 Instance rom/rom1.inst in unit rom/rom1.inst of type RAMB16_S4 has been replaced by RAMB16 Instance rom/rom0.inst in unit rom/rom0.inst of type RAMB16_S4 has been replaced by RAMB16 From in and out of unit vg, both signals CLK_6 and CLK_6 have a KEEP attribute, signal CLK_6 will be lost. The value init of the FF/Latch MPU4051/core51/Rst_r_n hinder the constant cleaning in the block AsteroidsClock. You should achieve better results by setting this init to 1. The value init of the FF/Latch MPU4051/glue51/Int1_r_0 hinder the constant cleaning in the block AsteroidsClock. You should achieve better results by setting this init to 0. The value init of the FF/Latch MPU4051/uart/Samples_0 hinder the constant cleaning in the block AsteroidsClock. You should achieve better results by setting this init to 0. FF/Latch <MPU4051/core51/Int_Trig_r_6> (without init value) has a constant value of 0 in block <AsteroidsClock>. This FF/Latch will be trimmed during the optimization process. FF/Latch <MPU4051/tc2/E_r_0> (without init value) has a constant value of 0 in block <AsteroidsClock>. This FF/Latch will be trimmed during the optimization process. FF/Latch <MPU4051/tc2/Capture> (without init value) has a constant value of 0 in block <AsteroidsClock>. This FF/Latch will be trimmed during the optimization process. FF/Latch <MPU4051/tc2/T_r_0> (without init value) has a constant value of 0 in block <AsteroidsClock>. This FF/Latch will be trimmed during the optimization process. FF/Latch <MPU4051/tc01/I1_r_0> (without init value) has a constant value of 0 in block <AsteroidsClock>. This FF/Latch will be trimmed during the optimization process. FF/Latch <MPU4051/tc01/T1_r_0> (without init value) has a constant value of 0 in block <AsteroidsClock>. This FF/Latch will be trimmed during the optimization process. Due to other FF/Latch trimming, FF/Latch <MPU4051/tc2/E_r_1> (without init value) has a constant value of 0 in block <AsteroidsClock>. This FF/Latch will be trimmed during the optimization process. Due to other FF/Latch trimming, FF/Latch <MPU4051/tc2/T_r_1> (without init value) has a constant value of 0 in block <AsteroidsClock>. This FF/Latch will be trimmed during the optimization process. Due to other FF/Latch trimming, FF/Latch <MPU4051/tc01/I1_r_1> (without init value) has a constant value of 0 in block <AsteroidsClock>. This FF/Latch will be trimmed during the optimization process. Due to other FF/Latch trimming, FF/Latch <MPU4051/tc01/T1_r_1> (without init value) has a constant value of 0 in block <AsteroidsClock>. This FF/Latch will be trimmed during the optimization process. Node <XLXI_11/vg/Z_VECTOR_0> of sequential type is unconnected in block <AsteroidsClock>. Node <XLXI_11/vg/BEAM_ON> of sequential type is unconnected in block <AsteroidsClock>. Node <XLXI_11/cpu/BAH_7> of sequential type is unconnected in block <AsteroidsClock>. Node <XLXI_11/cpu/EF_i> of sequential type is unconnected in block <AsteroidsClock>. Node <XLXI_11/cpu/DBR_0> of sequential type is unconnected in block <AsteroidsClock>. Node <XLXI_11/AUDIO_OUT_3> of sequential type is unconnected in block <AsteroidsClock>. Node <XLXI_11/AUDIO_OUT_2> of sequential type is unconnected in block <AsteroidsClock>. Node <XLXI_11/AUDIO_OUT_1> of sequential type is unconnected in block <AsteroidsClock>. Node <XLXI_11/AUDIO_OUT_0> of sequential type is unconnected in block <AsteroidsClock>. Node <MPU4051/core51/Int_Acc_4> of sequential type is unconnected in block <AsteroidsClock>. Node <MPU4051/core51/Int_Acc_5> of sequential type is unconnected in block <AsteroidsClock>. Node <MPU4051/core51/Int_Acc_6> of sequential type is unconnected in block <AsteroidsClock>. Node <MPU4051/core51/RAM_Wr_i> of sequential type is unconnected in block <AsteroidsClock>. Node <MPU4051/core51/P2R_0> of sequential type is unconnected in block <AsteroidsClock>. Node <MPU4051/core51/P2R_1> of sequential type is unconnected in block <AsteroidsClock>. Node <MPU4051/core51/P2R_2> of sequential type is unconnected in block <AsteroidsClock>. Node <MPU4051/core51/P2R_3> of sequential type is unconnected in block <AsteroidsClock>. Node <MPU4051/core51/P2R_4> of sequential type is unconnected in block <AsteroidsClock>. Node <MPU4051/core51/P2R_5> of sequential type is unconnected in block <AsteroidsClock>. Node <MPU4051/core51/P2R_6> of sequential type is unconnected in block <AsteroidsClock>. Node <MPU4051/core51/P2R_7> of sequential type is unconnected in block <AsteroidsClock>. Node <MPU4051/uart/RXD_O> of sequential type is unconnected in block <AsteroidsClock>. The FF/Latch <XLXI_11/shpsnd_filtered_3> in Unit <AsteroidsClock> is equivalent to the following FF/Latch, which will be removed : <XLXI_11/shpsnd_filtered_2>